New CCDE 352-001 PDF and 352-001 VCE (2019 Version)

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
267
Reaction score
22
Points
18
(2019 April)Some new Cisco CCDE 352-001 Exam Questions:

New Question
A designer is working with a large bank to redesign their network. The designer wants to minimize complaints regarding slow application response times across the WAN. It is suspected that currently traffic is not being classified and marked correctly somewhere in the network. Which tool should the designer recommend to validate quality of service mappings and use?

A. SNMP
B. IPFIX
C. IP SLA
D. protocol analyzer
E. NBAR

Answer: B

New Question
A network design includes a long signaling delay in notifying the Layer 3 control plane that an interface has failed. Which two of these actions would reduce that delay? (Choose two.)

A. Enable lower data link layer recovery systems to have an opportunity to restore the interface.
B. Increase the notification of interface flaps.
C. Reduce the time for the network to reconverge.
D. Increase network stability.

Answer: AD

New Question
Your company experienced a number of network incidents that had a significant impact on business operations. Because a root cause cannot be identified, your CTO asks you to help the network management team implement the FCAPS framework. On which two areas would you provide guidance to the network management team? (Choose two.)

A. change management
B. accounting management
C. service level management
D. fault management

Answer: BD

New Question
What are two benefits of using BFD for failure detection in the design of a network? (Choose two.)

A. BFD can provide failure detection in less than one second.
B. BFD can be used as a generic and consistent failure detection mechanism for EIGRP, IS-IS,
and OSPF.
C. BFD eliminates router protocol hello notification.
D. BFD can be used for all types of network interfaces.
E. BFD is independent of the network protocol.

Answer: AB

New Question
You are designing a solution to eliminate the risk of high CPU utilization on a core network composed of CRS-1 devices. Which option would eliminate the risk of high CPU utilization across the network?

A. Use Local Packet Transport Services (LPTS) to manage hardware SNMP flow rate.
B. Use the in-band control plane policy feature to reduce the SNMP flow rate.
C. Use the control plane policy feature and reduce SNMP flow rate.
D. Use control-plane management-plane in-band and reduce the SNMP flow rate.
E. Use the control-plane management-plane out-of-band feature to reduce the SNMP flow rate.

Answer: A

New Question ign using carrier Ethernet, which three mechanisms can be used to improve Layer 2 down detection and thereby reduce routing convergence time? (Choose three.)

A. BFD
B. Ethernet port debounce timers
C. link-state tracking
D. object tracking
E. fast IGP hello

Answer: ADE

New Question
The network administrator of a branch office network has decided to deploy Unicast RPF at the access layer. He insists that the design must guarantee that all the packets arriving on the router interfaces are assigned to the same interface subnet.
Which mode of Unicast RPF would you recommend as the lead network designer?

A. uRPF strict mode
B. uRPF loose mode
C. uRPF VRF mode
D. RPF feasible mode

Answer: A

New Question
A senior network designer suggests that you should improve network convergence times by reducing BGP timers between your CE router and the PE router of the service provider. Which three factors should you to consider when you adjust the timer values? (Choose three.)

A. access bandwidth
B. service provider agreement to support tuned timers
C. number of routes on the CE router
D. number of VRFs on the PE router
E. service provider scheduling of changes to the PE

Answer: ABC

New Question
Your design client has requested that you ensure that the client devices are not dynamically configured with incorrect DNS information. When finalizing the network design, which security option must be configured on the switches?

A. IGMP snooping
B. DHCP snooping
C. root guard
D. DNS snooping

Answer: B

New Question
What are two functions of an NSSA in an OSPF network design? (Choose two.)

A. It overcomes issues with suboptimal routing when there are multiple exit points from the area.
B. It allows ASBRs to inject external routing information into the area.
C. An ASBR advertises Type 7 LSAs into the area.
D. An ABR advertises Type 7 LSAs into the area.
E. It uses opaque LSAs.

Answer: BC

New Question
As part of the security protocol for your network design, you have designated that option 82 is enabled for DHCP snooping.
When option 82 is enabled, which information will be added to the DHCP request?

A. switch MAC address and VLAN, module, and port
B. remote ID and circuit ID
C. switch IP address and VLAN, module, and port
D. switch MAC address and switch IP address

Answer: A


New QuestionS
............................................................................................................
More at:
 

JudithRobinson

Member
Member
Joined
Apr 15, 2019
Messages
50
Reaction score
1
Points
8
100% Success Opt Now: https://www.theexamcerts.com/Cisco/352-001-pdf-exam-dumps If you want to prepare for 352-001 Cisco ADVDESIGN exam in shortest possible time, with minimum effort but for the most effective result, you can use TheExamCerts Cisco 352-001 exam dumps. TheExamCerts has a variety of 352-001 Cisco Certified Design Expert certification exam braindumps and other exam preparation material which gives you consolidation in the ways of your interest and ease. TheExamCerts delivers Cisco 352-001 exam dumps which give you detailed and logical coverage of Cisco 352-001 exam pattern syllabus and provide you with the real 352-001 exam environment as these products are built by IT examiners so you experience the real Cisco 352-001 exam features in our 352-001 exam products. Try free demo of Cisco 352-001 exam questions before buy actual dumps questions. Follow this link and get 20% discount offer [Limited Time]: https://www.theexamcerts.com/Cisco/352-001-pdf-exam-dumps
 

lilyflora

Member
Member
Joined
Apr 30, 2019
Messages
24
Reaction score
0
Points
1
No doubt about the validity or authority of 352-001 Dumps originated into my mind when I was using this to prepare for my IT exam. The series of questions and answers defined everything well and I could pick the point of each course pleased. I say thanks to them for gratifying their guarantee for success with 352-001 Questions And Answers.
 

xander luis

Member
Member
Joined
Jun 28, 2018
Messages
280
Reaction score
111
Points
33
Recently I pass Exam with good marks and get 352-001 exam certification. I tried many study material for passing 352-001 Exam then I find the actual 352-001 exam dumps pdf. It is so lucky for me. Highly recommended to everyone, Thanks.
 
Top