New AZ-400 PDF and AZ-400 VCE Dumps 2020 Version

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
Some new AZ-400 Exam Questions:

New Question
Note: This question part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the staled goals. Some question sets might have more than one correct solution, whale others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to It. As a result, these questions will not appear in the review screen.
You integrate a cloud-hosted Jenkins server and a new Azure DevOps depsoyment.
You need Azure DevOps to send a notification to Jenkins when a developer commits changes to a branch in Azure Repos.
Solution: You add a trigger to the build pipeline.
Does this meet the goal?

A. Yes
B. NO

Answer: B

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an approval process that contains a condition. The condition requires that releases be approved by a team leader before they are deployed.
You haw a pokey stating that approvals must occur within eight hours.
You discover that deployments only if the approvals take longer than two hours.
You need to ensure that the deployments only fail if the approvals take longer than hours.
Solution From Post -deployment conditions, you modify the Timeout setting for post-deployment approvals.
Does this meet the goal?

A. Yes
B. NO

Answer: B

New Question
Note: This question is part of * series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sett might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an approval process that contains a condition. The condition requires that releases be approved by a team leader before they are deployed.
You have a poky stating that approvals must occur within eight hour.
You discover that deployments fail if the approvals take longer than two hours.
You need to ensure that the deployments only fail if the approvals take longer than eight hours.
Solution: From Post-deployment conditions, you modify the Time between re-evaluation of gates option.
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question n part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution
After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen.
You have an approval process that contains a condition. The condition requires that releases be approved by a team leader before they are deployed.
You have a policy stating that approvals must occur within eight hours.
You discover that deployments fail if the approvals lake longer than two hours.
You need to ensure that the deployments only fail if the approvals take longer than eight hours. Solution: From Pre-deployment conditions, you modify the Timeout setting for pre-deployment approvals.
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has a prefect in Azure DevOps for a new web application.
You need to ensure that when code is checked in, a build runs automatically.
Solution: from the Triggers tab of the build pipeline, you select Enable continuous integration
Does the meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This Question Is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to ft. As a result these questions will not appear in the review screen.
You company has a prefect in Azure DevOps for a new web application.
You need to ensure that when code is checked in, a build runs automatically.
Solution: From the Triggers tab of the build pipeline, you selected Batch changes while a build is in progress
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Your company has a project in Azure DevOps for a new web application.
You need to ensure that when code is checked in, a build runs automatically.
Solution: From the Continuous deployment trigger settings of the release pipeline, you enable the Pull request trigger setting.
Does the meet the goal?

A. Yes
B. No

Answer: B

New Question
You plan to create an image that will contain a .NET Core application. You have a Dockerfile file that contains the following code. (Line numbers are included for reference only.)

You need to ensure that the image is as small as possible when the image is built.
Which line should you modify in the file?

A. 1
B. 3
C. 4
D. 7

Answer: A

New Question
Your company has a hybrid cloud between Azure and Azure Stack.
The company uses Azure DevOps for its CI/CD pipelines. Some applications are built by using Erlang and Hack.
You need to ensure that Erlang and Hack are supported as part of the build strategy across the hybrid cloud. The solution must minimize management overhead.
What should you use to execute the build pipeline?

A. AzureDevOps self-hosted agents on Azure DevTest Labs virtual machines.
B. AzureDevOps self-hosted agents on virtual machine that run on Azure Stack
C. AzureDevOps self-hosted agents on Hyper-V virtual machines
D. a Microsoft-hosted agent

Answer: B

New Question
You are automating the build process for a Java-based application by using Azure DevOps.
You need to add code coverage testing and publish the outcomes to the pipeline.
What should you use?

A. Cobertura
B. Bullseye Coverage
C. MSTest
D. Coverlet

Answer: A

1.Download 2019 New AZ-400 Exam Dumps (PDF and VCE) at:

2.Get 2019 Free Braindump2go AZ-400 Exam Questions from Google Drive:
 
Last edited:

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
More:

New Question
Your company builds a multi tier web application.
You use Azure DevOps and host the production application on Azure virtual machines.
Your team prepares an Azure Resource Manager template of the virtual machine that you mil use to test new features.
You need to create a staging environment in Azure that meets the following requirements:
  • Minimizes the cost of Azure hosting
  • Provisions the virtual machines automatically
  • Use* the custom Azure Resource Manager template to provision the virtual machines
What should you do?

A. In Azure DevOps, configure new tasks in the release pipeline to create and delete the virtual machines m Azure DevTest Labs.
B. From Azure Cloud Shell, run Azure PowerShell commands to create and delete the new virtual machines in a staging resource group.
C. In Azure DevOps, configure new tasks in the release pipeline to deploy to Azure Cloud Services.
D. In Azure Cloud Shell, run Azure CLI commands to create and delete the new virtual machines in a staging resource group.

Answer: A

New Question
You manage build pipelines and deployment pipelines by using Azure DevOps.
Your company has a team of 500 developers. New members are added continual lo the team You need to automate me management of users and licenses whenever possible
Which task must you perform manually?

A. modifying group memberships
B. procuring licenses
C. adding users
D. assigning entitlements

Answer: B

New Question
During a code review, you discover many quality issues. Many modules contain unused variables and empty catch Modes. You need to recommend a solution to improve the quality o' the code. What should you recommend?

A. In a Gradle build task, select Run Checkstyle.
B. In an Xcode build task, select Use xcpretty from Advanced
C. In a Grunt build task, select Enabled from Control Options.
D. In a Maven build task, select Run PMD.

Answer: D

New Question
Your company plans to use an agile approach to software development
You need to recommend an application to provide communication between members of the development team who work in locations around the world. The application must meet the following requirements:
  • Provide the ability to isolate the members of efferent project teams into separate communication channels and to keep a history of the chats within those channels.
  • Be available on Windows 10, Mac OS, iOS, and Android operating systems.
  • Provide the ability to add external contractors and suppliers to projects.
  • Integrate directly with Azure DevOps.
What should you recommend?

A. Octopus
B. Bamboo
C. Microsoft Project
D. Slack

Answer: D

New Question
Your company uses Azure DevOps for the build pipelines and deployment pipelines of Java based projects. You need to recommend a strategy for managing technical debt.
Which two actions should you include in the recommendation? Each correct answer presents part of the solution
NOTE: Each correct selection is worth one point.

A. Integrate Azure DevOps and SonarQube.
B. Integrates Azure DevOPs and Azure DevTest Labs.
C. Configure post-deployment approvals in the deployment pipeline.
D. Configure pre-deployment approvals in the deployment pipeline.

Answer: AC

New Question
Your company deploys applications m Docket containers.
You want to detect known exploits in the Docket images used to provision the Docker containers.
You need to integrate image scanning into the application lifecycle. The solution must expose the exploits as early as possible during the application lifecycle.
What should you configure?

A. a task executed in the continuous deployment pipeline and a scheduled task against a running production container.
B. a task executed in the continuous integration pipeline and a scheduled task that analyzes the production container.
C. a task executed in the continuous integration pipeline and a scheduled task that analyzes the image registry
D. manual tasks performed during the planning phase and the deployment phase

Answer: C

New Question
You are developing a multi-tier application. The application will use Azure App Service web apps as the front end and an Azure SQL database as the back end. The application will use Azure functions to write some data to Azure Storage.
You need to send the Azure DevOps team an email message when the front end fails to return a status code of 200.
Which feature should you use?

A. Service Map in Azure Log Analytics
B. Profiler in Azure Application Insights
C. availability tests in Azure Application Insights
D. Application Map in Azure Application Insights

Answer: D

New Question
Your company has a project in Azure DevOps for a new web application.
The company uses Service Now for change management.
You need to ensure that a change request is processed before any components can be deployed to the production environment.
What are two ways to integrate into the Azure DevOps release pipeline? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. Define a deployment control that invokes the Service Now SOAP API.
B. Define a post deployment gate after the deployment to the QA stage.
C. Define a deployment control that invokes the ServiceNow REST API.
D. Define a pre deployment gate before the deployment to the Prod stage.

Answer: BD

New Question
Your company has an on-premises Bitbucket Server that is used for Git-based source control. The server is protected by a firewall that blocks inbound Internet traffic.
You plan to use Azure DevOps to manage the build and release processes
Which two components are required to integrate Azure DevOps and Bitbucket?
Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one port.

A. an External Git service connection
B. a Microsoft hosted agent
C. service hooks
D. a self-hosted agent
E. a deployment M group

Answer: AD

New Question
You have a brand policy in a project in Azure DevOps. The policy requires that code always builds successfully.
You need to ensure that a specific user can always merge change to the master branch, even if the code fails to compile. The solution must use the principle of least privilege.
What should you do?

A. From the Security setting of the repository, modify the access control tor the user.
B. From the Security settings of the branch, modify the access control for the user.
C. Add the user to the Build Administrators group,
D. Add the user to the Project Administrators group

Answer: B

New Question
You have an Azure Resource Manager template that deploys a multi-tier application.
You need to prevent the user who performs the deployment from viewing the account credentials and connection strings used by the application.
What should you use?

A. an Azure Resource Manager parameter file
B. an Azure Storage table
C. an Appsettings.json files
D. Azure Key Vault
E. a Web.config file

Answer: D
At:
 

Erika Jacobs

Member
Member
Joined
Apr 30, 2019
Messages
1,354
Reaction score
9
Points
38
100% Success Opt Now https://www.theexamcerts.com/Microsoft/AZ-400-pdf-exam-dumps - Pass your Microsoft AZ-400 exam in first try with updated dumps questions. TheExamCerts Provide the best way to pass your AZ-400 Azure DevOps Engineer Expert certificaiton exam in limited time with complete moeny back guarantee. If you want to make your success 100% definite in Microsoft AZ-400 exam dumps. After complete satisfaction you can go with a purchase Microsoft AZ-400 exam dumps with theexamcerts. You can also get 30% discount Use this Coupon 30%OFF on Microsoft AZ-400 exam dumps. Most candidates fail to pass the Microsoft AZ-400 exam certification because they think they have studied related Microsoft AZ-400 study guides and have enough technical knowledge but all go wast. If you want to achive your goal within limited time, hurry to join us. It is also necessary to check the complete crouse outline and prepare from all the Microsoft AZ-400 new questions and answers. Click here on following link to get valid dumps. https://www.theexamcerts.com/Microsoft/AZ-400-pdf-exam-dumps
 

gankganka

Member
Member
Joined
Jun 17, 2019
Messages
282
Reaction score
1
Points
18
Passing the AZ-400 exam is no more difficult, with latest AZ-400 dumps pdf anyone can easily pass the AZ-400 exam on the first attempt! The best thing is 100% success rate & money back assurance.

Note:- New Questions has been added to the AZ-400 PDF.

Get the complete AZ-400 Question Answers PDF & Start preparation:- AZ-400 Dumps 2019

https://www.realdumpspdf.com/exam/az-400-dumps-pdf/

Product Features:

1) 100% Success Rate

2) Money Back Assurance

3) Up-to-date Questions

4) Instant Download

5) Free Updates for 3 months
 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
October/2019 New Braindump2go AZ-400 Exam Questions,

New Question
Your company creates a web application.
You need to recommend a solution that automatically sends to Microsoft Teams a dairy summary of the exceptions that occur m the application.
Which two Azure services should you recommend? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Microsoft Visual Studio App Center
B. Azure DevOps Project
C. Azure Logic Apps
D. Azure Pipelines
E. Azure Application Insights

Answer: CE

New Question
Your company plans to use an agile approach to software development.
You need to recommend an application to provide communication between members of the development team who work in locations around the world. The applications must meet the following requirements:
  • Provide the ability to isolate the members of different project teams into separate communication channels and to keep a history of the chats within those channels.
  • Be available on Windows 10, Mac OS, iOS, and Android operating systems.
  • Provide the ability to add external contractors and suppliers to projects.
  • Integrate directly with Azure DevOps.
What should you recommend?

A. Microsoft Project
B. Bamboo
C. Microsoft Lync
D. Microsoft Teams

Answer: D

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has a project in Azure DevOps for a new web application.
You need to ensure that when code is checked in, a build runs automatically.
Solution: From the Pre-deployment conditions settings of the release pipeline, you select After stage.
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has a project in Azure DevOps for a new web application.
You need to ensure that when code is checked in, a build runs automatically.
Solution: From the Pre-deployment conditions settings of the release pipeline, you select Batch changes while a build is in progress.
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an approval process that contains a condition. The condition requires that releases be approved by a team leader before they are deployed.
You have a policy stating that approvals must occur within eight hours. You discover that deployment fail if the approvals take longer than two hours.
You need to ensure that the deployments only fail if the approvals take longer than eight hours.
Solution: From Pre-deployment conditions, you modify the Time between re-evaluation of gates option.
Does this meet the goal?

A. Yes
B. No

Answer: A

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to create a release pipeline that will deploy Azure resources by using Azure Resource Manager templates. The release pipeline will create the following resources:
  • Two resource groups
  • Four Azure virtual machines in one resource group
  • Two Azure SQL databases in other resource group
You need to recommend a solution to deploy the resources.
Solution: Create two standalone templates, each of which will deploy the resources in its respective group.
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to create a release pipeline that will deploy Azure resources by using Azure Resource Manager templates. The release pipeline will create the following resources:
  • Two resource groups
  • Four Azure virtual machines in one resource group
  • Two Azure SQL databases in other resource group
You need to recommend a solution to deploy the resources.
Solution: Create a main template that will deploy the resources in one resource group and a nested template that will deploy the resources in the other resource group.
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to create a release pipeline that will deploy Azure resources by using Azure Resource Manager templates. The release pipeline will create the following resources:
  • Two resource groups
  • Four Azure virtual machines in one resource group
  • Two Azure SQL databases in other resource group
You need to recommend a solution to deploy the resources.
Solution: Create a main template that has two linked templates, each of which will deploy the resource in its respective group.
Does this meet the goal?

A. Yes
B. No

Answer: A

New Question
Your company is concerned that when developers introduce open source libraries, it creates licensing compliance issues.
You need to add an automated process to the build pipeline to detect when common open source libraries are added to the code base.
What should you use?

A. Microsoft Visual SourceSafe
B. PDM
C. WhiteSource
D. OWASP ZAP

Answer: C

New Question
Note: This question is part of a ser les of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question m this section, you will NOT be able to return to it As a result, these questions will not appear m the review screen
You integrate a cloud-hosted Jenkins server and a new Azure Dev Ops deployment.
You need Azure Dev Ops lo send a notification to Jenkins when a developer commits changes to a branch in Azure Repos.
Solution: You create an email subscription to an Azure DevOps notification.
Does this meet the goal?

A. Yes
B. NO

Answer: B

New Question
Your company develops an app for OS. All users of the app have devices that are members of a private distribution group in Microsoft Visual Studio App Center.
You plan to distribute a new release of the app.
You need to identify which certificate file you require to distribute the new release from App Center.
Which file type should you upload to App Center?

A. .cer
B. .pvk
C. .pfx
D. .p12

Answer: D

New Question
Your company hosts a web application in Azure. The company uses Azure Pipelines for the build and release management of the application.
Stakeholders report that the past few releases have negatively affected system performance.
You configure alerts in Azure Monitor.
You need to ensure that new releases are only deployed to production if the releases meet defined performance baseline criteria in the staging environment first
What should you use to prevent the deployment of releases that fail to meet the performance baseline?

A. a trigger
B. an Azure function
C. a gate
D. an Azure Scheduler job

Answer: C

1.Download 2019 New AZ-400 Exam Dumps (PDF and VCE) at:

2.Get 2019 Free Braindump2go AZ-400 Exam Questions from Google Drive:
 

James Hilton

Member
Member
Joined
Jun 14, 2019
Messages
3,325
Reaction score
88
Points
38
To pass Microsoft az-400 exam dumps is no more dream. Now Microsoft students don’t need to burn midnight all to pass Microsoft az-400 exam. Just visit Certs4sale and get material from Microsoft az-400 Expert. Get a 30% Discount by using PROMO CODE "30% OFF". Certs4sale offers more relevant and up to date material for Microsoft exam dumps so the material is 100% accurate that’s why I recommend this site for your Microsoft az-400 exam dumps on the basis of above-mentioned qualities. So light up your lamp of success by visiting the link below:


https://www.certs4sale.com/Microsoft/az-400-pdf-exam-dumps
 

James Hilton

Member
Member
Joined
Jun 14, 2019
Messages
3,325
Reaction score
88
Points
38
To pass Microsoft az-400 exam dumps is no more dream. Now Microsoft students don’t need to burn midnight all to pass Microsoft az-400 exam. Just visit Certs4sale and get material from Microsoft az-400 Expert. Get a 30% Discount by using PROMO CODE "30% OFF". Certs4sale offers more relevant and up to date material for Microsoft exam dumps so the material is 100% accurate that’s why I recommend this site for your Microsoft az-400 exam dumps on the basis of above-mentioned qualities. So light up your lamp of success by visiting the link below:


https://www.certs4sale.com/Microsoft/az-400-pdf-exam-dumps
 

BruceWeiss

Member
Member
Joined
Jun 23, 2019
Messages
11,662
Reaction score
3
Points
38
To pass Microsoft AZ-400 exam is no more dream. Now Microsoft students don’t need to burn midnight all to pass Microsoft AZ-400 exam. Just visit Exams4Sale and get material from Microsoft AZ-400 Expert.Get 35% discount by using promocode 35%OFF. Exams4Sale offers more relevant and upto date material for Microsoft exam dumps so the material is 100% accurate that’s why I recommend you this site for your Microsoft AZ-400 exam on the basic of above mentioned qualities. So light up your lamp of success by visiting the link below:

 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
November/2019 some new braindump2go AZ-400 Exam Questions,

New Question
Your company is building a new solution in Java.
The company currently uses a SonarQube server to analyze the code of .NET solutions.
You need to analyze and monitor the code quality of the Java solution.
Which task types should you add to the build pipeline?

A. Octopus
B. Chef
C. Maven
D. Grunt

Answer: A

New Question
Your company has a project in Azure DevOps.
You need to ensure that when there are multiple builds pending deployment only the most recent build is deployed.
What should you use?

A. deployment queue settings
B. deployment conditions
C. release gates
D. pull request triggers

Answer: A

New Question
Your company develops a client banking application that processes a large volume of data.
Code quality is an ongoing issue for the company. Recently, the code quality has deteriorated because of an increase in time pressure on the development team.
You need to implement static code analysis.
During which phase should you use static code analysis?

A. build
B. production release
C. staging
D. integration testing

Answer: B

New Question
You have a GitHub repository.
You create a new repository in Azure DevOps.
You need to recommend a procedure to clone the repository from GitHub to Azure DevOps.
What should you recommend?

A. Create a webhook.
B. Create a service connection for GitHub.
C. From Import a Git repository, click Import
D. Create a pull request.
E. Create a personal access token in Azure DevOps.

Answer: C

New Question
Your company is concerned that when developers introduce open source libraries, it creates licensing compliance issues.
You need to add an automated process to the build pipeline to detect when common open source libraries are added to the code base.
What should you use?

A. PDM
B. OWASPZAP
C. WhiteSource
D. Jenkins

Answer: C

New Question
Your company has a project in Azure DevOps for a new application. The application will be deployed to several Azure virtual machines that run Windows Server 2016.
You need to recommend a deployment strategy for the virtual machines. The strategy must meet the following requirements:
  • Ensure that the virtual machines maintain a consistent configuration.
  • Minimize administrative effort to configure the virtual machines
What should you include in the recommendation?

A. Deployment YAML and Azure pipeline stage templates
B. Azure Resource Manager templates and the Custom Script Extension for Windows
C. Azure Resource Manager templates and the PowerShell Desired State Configuration (DSC) extension
for Windows
D. Deployment YAML and Azure pipeline deployment groups\

Answer: C

New Question
Drag and Drop Question
You are implementing a package management solution for a Node.js application by using Azure Artifacts.
You need to configure the development environment to connect to the package repository. The solution must minimize the likelihood that credentials will be leaked. Which file should you use to configure each connection? To answer, drag the appropriate files to the correct connections. Each file may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content
NOTE: Each correct selection is worth one point.
2023
Answer:
2024

New Question
Drag and Drop Question
You plan to use Azure Kubernetes Service (AKS) to host containers deployed from images hosted in a Docker Trusted Registry.
You need to recommend a solution for provisioning and connecting to AKS. The solution must ensure that AKS is RBAC-enaWed and uses a custom service principal.
Which three commands should you recommend be run in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the coned order.
2025
Answer:
2026

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that m.ght meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen.
You integrate a cloud-hosted Jenkins server and a new Azure DevOps deployment.
You need Azure DevOps to send a notification to Jenkins when a developer commits changes to a branch in Azure Repos.
Solution: You create a service hook subscription that uses the build completed event
Does this meet the goal?

A. Yes
B. No

Answer: A

1.Download 2019 New AZ-400 Exam Dumps (PDF and VCE) at:

2.Get 2019 Free Braindump2go AZ-400 Exam Questions from Google Drive:
 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
New Question
Drag and Drop Question
Your company plans to deploy an application to the following endpoints:
  • Ten virtual machines hosted in Azure.
  • Ten virtual machines hosted in an on-premises data center environment
All the virtual machines have the-Azure Pipelines agent.
You need to implement a release strategy for deploying the application to the endpoints.
What should you recommend using to deploy the application to the endpoints? To answer, drag the appropriate components to the correct endpoint.
Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or soon to view content
NOTE: Each correct selection n worth one point.
2027
Answer:
2028
New Question
Drag and Drop Question
You need to configure access to Azure DevOps Agent pooh to meet the forwarding requirements:
  • Use a project agent pool when authoring build release pipelines.
  • View the agent pool and agents of the organization.
  • Use the principle of least privilege.
Which role memberships are required for the Azure 0e%Oos organization and the project? To answer, drag the appropriate role membership to the correct targets. Each role membership may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to content
NOTE: Each correct selection is worth one point.
2029
Answer:
2030
New Question
Hotspot Question
You are configuring a release pipeline in Azure DevOps as shown in the exhibit.
2031
Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
2032
Answer:
2033
New Question
Drag and Drop Question
Your company has four projects. The version control requirements for each project are shown in the following table.
2034
You plan to use Azure Repos for all the projects.
Which version control system should you use for each project? To answer, drag the appropriate version control systems to the correct projects. Each version control system may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
2035
Answer:
2036
New Question
Note: This question is part of a ser les of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question m this section, you will NOT be able to return to it As a result, these questions will not appear m the review screen
You integrate a cloud-hosted Jenkins server and a new Azure Dev Ops deployment.
You need Azure Dev Ops lo send a notification to Jenkins when a developer commits changes to a branch in Azure Repos.
Solution: You create an email subscription to an Azure DevOps notification.
Does this meet the goal?

A. Yes
B. NO

Answer: B

New Question
Your company develops an app for OS. All users of the app have devices that are members of a private distribution group in Microsoft Visual Studio App Center.
You plan to distribute a new release of the app.
You need to identify which certificate file you require to distribute the new release from App Center.
Which file type should you upload to App Center?

A. .cer
B. .pvk
C. .pfx
D. .p12

Answer: D

New Question
Your company hosts a web application in Azure. The company uses Azure Pipelines for the build and release management of the application.
Stakeholders report that the past few releases have negatively affected system performance.
You configure alerts in Azure Monitor.
You need to ensure that new releases are only deployed to production if the releases meet defined performance baseline criteria in the staging environment first
What should you use to prevent the deployment of releases that fail to meet the performance baseline?

A. a trigger
B. an Azure function
C. a gate
D. an Azure Scheduler job

Answer: C

New Question
Your company is building a mobile app that targets Android devices and OS devices. Your team uses Azure DevOps to manage all work items and release cycles. You need to recommend a solution to perform the following tasks
  • Collect crash reports for issue analysis
  • Distribute beta releases to your testers.
  • Get user feedback on the functionality of new apps.
What should you include in the recommendation?

A. Jenkins integration
B. Azure Application Insights widgets
C. the Microsoft Test & Feedback extension
D. Microsoft Visual Studio App Center integration

Answer: D

Resources from:
https://issuu.com/home/published/_full-version_2019_new_braindump2go_az-400_vce_dum

Free Braindump2go AZ-400 Exam Questions from Google Drive:
 

DavidPhoenix

Member
Member
Joined
Jun 16, 2019
Messages
1,103
Reaction score
0
Points
36
100% Success Opt Now: https://www.theexamcerts.com/Microsoft/AZ-400-pdf-exam-dumps If you want to prepare for AZ-400 Microsoft Azure DevOps Solutions exam in shortest possible time, with minimum effort but for the most effective result, you can use TheExamCerts Microsoft AZ-400 exam dumps. TheExamCerts has a variety of AZ-400 Microsoft Certified Professional certification exam braindumps and other exam preparation material which gives you consolidation in the ways of your interest and ease. TheExamCerts delivers Microsoft AZ-400 exam dumps which give you detailed and logical coverage of Microsoft AZ-400 exam pattern syllabus and provide you with the real AZ-400 exam environment as these products are built by IT examiners so you experience the real Microsoft AZ-400 exam features in our AZ-400 exam products. Try free demo of Microsoft AZ-400 exam questions before buy actual dumps questions. Follow this link and get 20% discount offer [Limited Time]: https://www.theexamcerts.com/Microsoft/AZ-400-pdf-exam-dumps
 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
December/219 some new AZ-400 Exam Questions,

New Question
You are designing the development process for your company.
You need to recommend a solution for continuous inspection of the company's code base to locate common code patterns that are known to be problematic.
What should you include in the recommendation?

A. Microsoft Visual Studio test plans
B. Gradle wrapper scripts
C. SonarCloud analysis
D. the JavaScript task runner

Answer: C

New Question
SIMULATION
You need to ensure that an Azure web app named az400-9940427-main can retrieve secrets from an Azure key vault named az400-9940427-kv1 by using a system managed identity.
The solution must use the principle of least privilege.
To complete this task, sign in to the Microsoft Azure portal.
Answer:
  1. In Azure portal navigate to the az400-9940427-main app.
  2. Scroll down to the Settings group in the left navigation.
  3. Select Managed identity.
  4. Within the System assigned tab, switch Status to On. Click Save.
New Question
SIMULATION
You have an Azure function hosted in an App Service plan named az400-9940427-func1. You need to configure az400-9940427-func1 to upgrade the functions automatically whenever new code is committed to the master branch of https://github.com/Azure-Samples/functions-quickstart.
To complete this task, sign in to the Microsoft Azure portal.
Answer:
  1. Open Microsoft Azure Portal
  2. Log into your Azure account, select App Services in the Azure portal left navigation, and then select configure az400-9940427-func1.
  3. On the app page, select Deployment Center in the left menu.
  4. On the Build provider page, select Azure Pipelines (Preview), and then select Continue.
  5. On the Configure page, in the Code section:
For GitHub, drop down and select the Organization, Repository, and Branch you want to deploy continuously.
  1. Select Continue.
  2. On the Test page, choose whether to enable load tests, and then select Continue.
  3. Depending on your App Service plan pricing tier, you may see a Deploy to staging page. Choose whether to enable deployment slots, and then select Continue.
  4. After you configure the build provider, review the settings on the Summary page, and then select Finish.
New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure DevOps project.
Your build process creates several artifacts.
You need to deploy the artifacts to on-premises servers.
Solution: You deploy a Kubernetes cluster on-premises. You deploy a Helm agent to the cluster. You add a Download Build Artifacts task to the deployment pipeline.
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure DevOps project.
Your build process creates several artifacts.
You need to deploy the artifacts to on-premises servers.
Solution: You deploy a Docker build to an on-premises server. You add a Download Build Artifacts task to the deployment pipeline.
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure DevOps project.
Your build process creates several artifacts.
You need to deploy the artifacts to on-premises servers.
Solution: You deploy an Azure self-hosted agent to an on-premises server. You add a Copy and Publish Build Artifacts task to the deployment pipeline.
Does this meet the goal?

A. Yes
B. No

Answer: A

New Question
SIMULATION
You need to ensure that an Azure web app named az400-9940427-main supports rolling upgrades. The solution must ensure that only 10 percent of users who connect to az400-9940427-main use update versions of the app.
The solution must minimize administrative effort.
To complete this task, sign in to the Microsoft Azure portal.
Answer:
Set up staging environments in Azure App Service
  1. Open Microsoft Azure Portal
  2. Log into your Azure account, select your app's resource page, in the left pane, select Deployment slots > Add Slot.
3. In the Add a slot dialog box, give the slot a name, and select whether to clone an app configuration from another deployment slot. Select Add to continue.

  1. After the slot is added, select Close to close the dialog box. The new slot is now shown on the Deployment slots page. By default, Traffic % is set to 0 for the new slot, with all customer traffic routed to the production slot.
  2. Select the new deployment slot to open that slot's resource page.
6. Change TRAFFIC % to 10

New Question
SIMULATION
You plane to store signed images in an Azure Container Registry instance named az4009940427acr1.
You need to modify the SKU for az4009940427acr1 to support the planned images. The solution must minimize costs.
To complete this task, sign in to the Microsoft Azure portal.
Answer:
  1. Open Microsoft Azure Portal, and select the Azure Container Registry instance named az4009940427acr1.
  2. Under Policies, select Content Trust > Enabled > Save.
New Question
SIMULATION
You need to create a virtual machine template in an Azure DevTest Labs environment named az400- 9940427-dtl1. The template must be based on Windows Server 2016 Datacenter. Virtual machines created from the template must include the selenium tool and the Google Chrome browser.
To complete this task, sign in to the Microsoft Azure portal.
Answer:
  1. Open Microsoft Azure Portal
  2. Select All Services, and then select DevTest Labs in the DEVOPS section.
  1. From the list of labs, select the az400-9940427-dtl1 lab
  2. On the home page for your lab, select + Add on the toolbar.
  3. Select the Windows Server 2016 Datacenter base image for the VM.
  4. Select automation options at the bottom of the page above the Submit button.
  5. You see the Azure Resource Manager template for creating the virtual machine.
  6. The JSON segment in the resources section has the definition for the image type you selected earlier.
New Question
SIMULATION
You need to prepare a network security group (NSG) named az400-9940427-nsg1 to host an Azure DevOps pipeline agent. The solution must allow only the required outbound port for Azure DevOps and deny all other inbound and outbound access to the Internet.
To complete this task, sign in to the Microsoft Azure portal.
Answer:
  1. Open Microsoft Azure Portal and Log into your Azure account.
  2. Select network security group (NSG) named az400-9940427-nsg1
  3. Select Settings, Outbound security rules, and click Add
  4. Click Advanced
5. Change the following settings:
Destination Port range: 8080
Protocol. TCP
Action: Allow
Note: By default, Azure DevOps Server uses TCP Port 8080.

Resources From:

And,

New AZ-400 Exam Dumps (PDF and VCE) at:


Free Braindump2go AZ-400 Exam Questions from Google Drive:

 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
New Question
Drag and Drop Question
You provision an Azure Kubernetes Service (AKS) cluster that has RBAC enabled. You have a Helm chart for a client application.
You need to configure Helm and Tiller on the cluster and install the chart.
Which three commands should you recommend be run in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
3092
Answer:
3093
New Question
Drag and Drop Question
You are developing a full Microsoft .NET Framework solution that includes unit tests.
You need to configure SonarQube to perform a code quality validation of the C# code as part of the build pipelines.
Which four tasks should you perform in sequence? To answer, move the appropriate tasks from the list of tasks to the answer area and arrange them in the correct order.
3094
Answer:
3095
New Question
Hotspot Question
You currently use JIRA, Jenkins, and Octopus as part of your DevOps processes.
You plan to use Azure DevOps to replace these tools.
Which Azure DevOps service should you use to replace each tool? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
3096
Answer:
3097
New Question
Drag and Drop Question
You need to find and isolate shared code. The shared code will be maintained in a series of packages.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
3098
Answer:
3099
New Question
Drag and Drop Question
Your company wants to use Azure Application Insights to understand how user behaviors affect an application.
Which application Insights tool should you use to analyze each behavior? To answer, drag the appropriate tools to the correct behaviors. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
3100
Answer:
3101
New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to recommend an integration strategy for the build process of a Java application. The solution must meet the following requirements:
  • The builds must access an on-premises dependency management system.
  • The build outputs must be stored as Server artifacts in Azure DevOps.
  • The source code must be stored in a Git repository in Azure DevOps.
Solution: Configure an Octopus Tentacle on an on-premises machine. Use the Package Application task in the build pipeline.
Does this meet the goal?

A. Yes
B. No

Answer: A

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to recommend an integration strategy for the build process of a Java application. The solution must meet the following requirements:
  • The builds must access an on-premises dependency management system.
  • The build outputs must be stored as Server artifacts in Azure DevOps.
  • The source code must be stored in a Git repository in Azure DevOps.
Solution: Install and configure a self-hosted build agent on an on-premises machine. Configure the build pipeline to use the Default agent pool. Include the Java Tool Installer task in the build pipeline.
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to recommend an integration strategy for the build process of a Java application. The solution must meet the following requirements:
  • The builds must access an on-premises dependency management system.
  • The build outputs must be stored as Server artifacts in Azure DevOps.
  • The source code must be stored in a Git repository in Azure DevOps.
Solution: Configure the build pipeline to use a Hosted VS 2017 agent pool. Include the Java Tool Installer task in the build pipeline.
Does this meet the goal?

A. Yes
B. No

Answer: B

Resources From:

And,

New AZ-400 Exam Dumps (PDF and VCE) at:


Free Braindump2go AZ-400 Exam Questions from Google Drive:

 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
New Question
Hotspot Question
Your company has an Azure subscription.
The company requires that all resource group in the subscription have a tag named organization set to a value of Contoso.
You need to implement a policy to meet the tagging requirement.
How should you complete the policy? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
3102
Answer:
3103
New Question
Drag and Drop Question
You are defining release strategies for two applications as shown in the following table.
3104
Which release strategy should you use for each application? To answer, drag the appropriate release strategies to the correct applications. Each release strategy may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
3105
Answer:
3106
New Question
Drag and Drop Question
You are configuring Azure Pipelines for three projects in Azure DevOps as shown in the following table.
3107
Which version control system should you recommend for each project? To answer, drag the appropriate version control systems to the correct projects. Each version control system may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
3108
Answer:
3109
Resources From:

And,

New AZ-400 Exam Dumps (PDF and VCE) at:


Free Braindump2go AZ-400 Exam Questions from Google Drive:

 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
New Question
Your company uses Azure DevOps.
Only users who have accounts in Azure Active Directory can access the Azure DevOps environment.
You need to ensure that only devices that are connected to the on-premises network can access the Azure DevOps environment.
What should you do?

A. Assign the Stakeholder access level all users.
B. In Azure Active Directory, configure risky sign-ins.
C. In Azure DevOps, configure Security in Project Settings.
D. In Azure Active Directory, configure conditional access.

Answer: D

New Question
You are automating the testing process for your company.
You need to automate UI testing of a web application.
Which framework should you use?

A. JaCoco
B. Selenium
C. Xamarin.UITest
D. Microsoft.CodeAnalysis

Answer: B

New Question
You have an Azure DevOps organization named Contoso, an Azure DevOps project named Project1, an Azure subscription named Sub1, and an Azure key vault named vault1.
You need to ensure that you can reference the values of the secrets stored in vault1 in all the pipelines of Project1. The solution must prevent the values from being stored in the pipelines.
What should you do?

A. Create a variable group in Project1.
B. Add a secure file to Project1.
C. Modify the security settings of the pipelines.
D. Configure the security policy of Contoso.

Answer: A

New Question
Your team uses an agile development approach.
You need to recommend a branching strategy for the team's Git repository. The strategy must meet the following requirements.
  • Provide the ability to work on multiple independent tasks in parallel.
  • Ensure that checked-in code remains in a releasable state always.
  • Ensure that new features can be abandoned at any time.
  • Encourage experimentation.
What should you recommend?

A. a single long-running branch
B. multiple long-running branches
C. a single fork per team member
D. a single-running branch with multiple short-lived topic branches

Answer: D

New Question
Your company has a project in Azure DevOps for a new web application.
The company identifies security as one of the highest priorities.
You need to recommend a solution to minimize the likelihood that infrastructure credentials will be leaked.
What should you recommend?

A. Add a Run Inline Azure PowerShell task to the pipeline.
B. Add a PowerShell task to the pipeline and run Set-AzureKeyVaultSecret.
C. Add a Azurre Key Vault task to the pipeline.
D. Add Azure Key Vault references to Azure Resource Manger templates.

Answer: B

New Question
You have a project in Azure DevOps. You have an Azure Resource Group deployment project in Microsoft Visual Studio that is checked in to the Azure DevOps project.
You need to create a release pipeline that will deploy resources by using Azure Resource Manager templates. The solution must minimize administrative effort.
Which task type should you include in the solution?

A. Azure Cloud Service Deployment
B. Azure RM Web App Deployment
C. Azure PowerShell
D. Azure App Service Manage

Answer: C

New Question
Your company is building a new solution in Java.
The company currently uses a SonarQube server to analyze the code of .NET solutions.
You need to analyze and monitor the code quality of the Java solution.
Which task types should you add to the build pipeline?

A. Chef
B. Gradle
C. Octopus
D. Gulp

Answer: B

New Question
You have an Azure DevOps organization named Contoso and an Azure DevOps project named Project1.
You plan to use Microsoft-hosted agents to build container images that will host full Microsoft .NET Framework apps in a YAML pipeline in Project1.
What are two possible virtual machine images that you can use for the Microsoft-hosted agent pool? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. vs2017-win2016
B. ubuntu-16.04
C. win1803
D. macOS-10.13
E. vs.2015-win2012r2

Answer: BC

New Question
You have an application that consists of several Azure App Service web apps and Azure functions.
You need to access the security of the web apps and the functions.
Which Azure features can you use to provide a recommendation for the security of the application?

A. Security & Compliance in Azure Log Analytics
B. Resource health in Azure Service Health
C. Smart Detection in Azure Application Insights
D. Compute & apps in Azure Security Center

Answer: D

New Question
You have a private distribution group that contains provisioned and unprovisioned devices.
You need to distribute a new iOS application to the distribution group by using Microsoft Visual Studio App Center.
What should you do?

A. Request the Apple ID associated with the user of each device.
B. Register the devices on the Apple Developer portal.
C. Create an active subscription in App Center Test.
D. Add the device owner to the organization in App Center.

Answer: B

New Question
Drag and Drop Question
You are planning projects for three customers. Each customer's preferred process for work items is shown in the following table.
3110
The customers all plan to use Azure DevOps for work item management.
Which work item process should you use for each customer? To answer, drag the appropriate work item process to the correct customers. Each work item process may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
3111
Answer:
3112
Resources From:

And,

New AZ-400 Exam Dumps (PDF and VCE) at:


Free Braindump2go AZ-400 Exam Questions from Google Drive:

 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
New Question
Case Study 2 - Contoso, Ltd
Background
Contoso, Ltd. is a manufacturing company that has a main office in Chicago.
Contoso plans to improve its IT development and operations processes by implementing Azure DevOps principles. Contoso has an Azure subscription and creates an Azure DevOps organization.
The Azure DevOps organization includes:
The Docker extension
A deployment pool named Pool7 that contains 10 Azure virtual machines that run Windows Server 2016
The Azure subscription contains an Azure Automation account.
Contoso plans to create projects in Azure DevOps as shown in the following table.
3113
Technical requirements
Contoso identifies the following technical requirements:
Implement build agents for Project1.
Whenever possible, use Azure resources.
Avoid using deprecated technologies.
Implement a code flow strategy for Project2 that will:
  • Enable Team2 to submit pull requests for Project2.
  • Enable Team2 to work independently on changes to a copy of Project2.
  • Ensure that any intermediary changes performed by Team2 on a copy of Project2 will be subject to the same restrictions as the ones defined in the build policy of Project2.
Whenever possible implement automation and minimize administrative effort.
Implement Project3, Project5, Project6, and Project7 based on the planned changes
Implement Project4 and configure the project to push Docker images to Azure Container Registry.
You need to implement Project4.
What should you do first?

A. Add the FROM instruction in the Dockerfile file.
B. Add a Copy and Publish Build Artifacts task to the build pipeline.
C. Add a Docker task to the build pipeline.
D. Add the MAINTAINER instruction in the Dockerfile file.

Answer: C

New Question
Case Study 2 - Contoso, Ltd
Background
Contoso, Ltd. is a manufacturing company that has a main office in Chicago.
Contoso plans to improve its IT development and operations processes by implementing Azure DevOps principles. Contoso has an Azure subscription and creates an Azure DevOps organization.
The Azure DevOps organization includes:
The Docker extension
A deployment pool named Pool7 that contains 10 Azure virtual machines that run Windows Server 2016
The Azure subscription contains an Azure Automation account.
Contoso plans to create projects in Azure DevOps as shown in the following table.
3114
Technical requirements
Contoso identifies the following technical requirements:
Implement build agents for Project1.
Whenever possible, use Azure resources.
Avoid using deprecated technologies.
Implement a code flow strategy for Project2 that will:
  • Enable Team2 to submit pull requests for Project2.
  • Enable Team2 to work independently on changes to a copy of Project2.
  • Ensure that any intermediary changes performed by Team2 on a copy of Project2 will be subject to the same restrictions as the ones defined in the build policy of Project2.
Whenever possible implement automation and minimize administrative effort.
Implement Project3, Project5, Project6, and Project7 based on the planned changes
Implement Project4 and configure the project to push Docker images to Azure Container Registry.
You need to implement the code flow strategy for Project2 in Azure DevOps.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
3115
Answer:
3116
New Question
Case Study 2 - Contoso, Ltd
Background
Contoso, Ltd. is a manufacturing company that has a main office in Chicago.
Contoso plans to improve its IT development and operations processes by implementing Azure DevOps principles. Contoso has an Azure subscription and creates an Azure DevOps organization.
The Azure DevOps organization includes:
The Docker extension
A deployment pool named Pool7 that contains 10 Azure virtual machines that run Windows Server 2016
The Azure subscription contains an Azure Automation account.
Contoso plans to create projects in Azure DevOps as shown in the following table.
3117
Technical requirements
Contoso identifies the following technical requirements:
Implement build agents for Project1.
Whenever possible, use Azure resources.
Avoid using deprecated technologies.
Implement a code flow strategy for Project2 that will:
  • Enable Team2 to submit pull requests for Project2.
  • Enable Team2 to work independently on changes to a copy of Project2.
  • Ensure that any intermediary changes performed by Team2 on a copy of Project2 will be subject to the same restrictions as the ones defined in the build policy of Project2.
Whenever possible implement automation and minimize administrative effort.
Implement Project3, Project5, Project6, and Project7 based on the planned changes
Implement Project4 and configure the project to push Docker images to Azure Container Registry.
Drag and Drop Question
You need to recommend a procedure to implement the build agent for Project1.
Which three actions should you recommend be performed in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
3118
Answer:
3119
New Question
Your development team is building a new web solution by using the Microsoft Visual Studio integrated development environment (IDE).
You need to make a custom package available to all the developers. The package must be managed centrally, and the latest version must be available for consumption in Visual Studio automatically.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Publish the package to a feed.
B. Create a new feed in Azure Artifacts.
C. Upload a package to a Git repository.
D. Add the package URL to the Environment settings in Visual Studio.
E. Add the package URL to the NuGet Package Manager settings in Visual Studio.
F. Create a Git repository in Azure Repos.

Answer: ABE

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to create a release pipeline that will deploy Azure resources by using Azure Resource Manager templates. The release pipeline will create the following resources:
Two resource groups
Four Azure virtual machines in one resource group
Two Azure SQL databases in other resource group
You need to recommend a solution to deploy the resources.
Solution: Create a single standalone template that will deploy all the resources.
Does this meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an approval process that contains a condition. The condition requires that releases be approved by a team leader before they are deployed.
You have a policy stating that approvals must occur within eight hours.
You discover that deployment fail if the approvals take longer than two hours.
You need to ensure that the deployments only fail if the approvals take longer than eight hours.
Solution: From Post-deployment conditions, you modify the Timeout setting for post-deployment approvals.
Does this meet the goal?

A. Yes
B. No

Answer: B

Resources From:

And,

New AZ-400 Exam Dumps (PDF and VCE) at:


Free Braindump2go AZ-400 Exam Questions from Google Drive:

 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
New Question
Case Study - Litware
Overview
Existing Environment
Litware, Inc. e an independent software vendor (ISV). Litware has a main office and five branch offices.
Application Architecture
The company’s primary application is a single monolithic retirement fund management system based on ASP.NET web forms that use logic written in VB.NET. Some new sections of the application are written in C#.
Variations of the application are created for individual customers. Currently, there are more than 80 live code branches in the application’s code base.
The application was developed by using Microsoft Visual Studio. Source code is stored in Team Foundation Server (TFS) in the main office. The branch offices access the source code by using TFS proxy servers.
Architectural Issues
Litware focuses on writing new code for customers. No resources are provided to refactor or remove existing code. Changes to the code base take a long time, as dependencies are not obvious to individual developers.
Merge operations of the code often take months and involve many developers. Code merging frequently introduces bugs that are difficult to locate and resolve.
Customers report that ownership costs of the retirement fund management system increase continually. The need to merge unrelated code makes even minor code changes expensive.
Customers report that bug reporting is overly complex.
Planned changes
Litware plans to develop a new suite of applications for investment planning. The investment planning applications will require only minor integration with the existing retirement fund management system.
The investment planning applications suite will include one multi-tier web application and two iOS mobile application. One mobile application will be used by employees; the other will be used by customers.
Litware plans to move to a more agile development methodology. Shared code will be extracted into a series of packages.
Litware has started an internal cloud transformation process and plans to use cloud-based services whenever suitable.
Litware wants to become proactive in detecting failures, rather than always waiting for customer bug reports.
Technical requirements
The company’s investment planning applications suite must meet the following requirements:
New incoming connections through the firewall must be minimized.
Members of a group named Developers must be able to install packages.
The principle of least privilege must be used for all permission assignments.
A branching strategy that supports developing new functionality in isolation must be used.
Members of a group named Team Leaders must be able to create new packages and edit the permissions of package feeds.
Visual Studio App Center must be used to centralize the reporting of mobile application crashes and device types in use.
By default, all releases must remain available for 30 days, except for production releases, which must be kept for 60 days.
Code quality and release quality are critical. During release, deployments must not proceed between stages if any active bugs are logged against the release.
The mobile applications must be able to call the share pricing service of the existing retirement fund management system. Until the system is upgraded, the service will only support basic authentication over HTTPS.
The required operating system configuration for the test servers changes weekly. Azure Automation State Configuration must be used to ensure that the operating system on each test server is configured the same way when the servers are created and checked periodically.
Current Technical Issue
The test servers are configured correctly when first deployed, but they experience configuration drift over time. Azure Automation State Configuration fails to correct the configurations.
Azure Automation State Configuration nodes are registered by using the following command.

Which branching strategy should you recommend for the investment planning applications suite?

A. release isolation
B. main only
C. development isolation
D. feature isolation

Answer: D

New Question
Case Study- Litware
Overview
Existing Environment
Litware, Inc. e an independent software vendor (ISV). Litware has a main office and five branch offices.
Application Architecture
The company’s primary application is a single monolithic retirement fund management system based on ASP.NET web forms that use logic written in VB.NET. Some new sections of the application are written in C#.
Variations of the application are created for individual customers. Currently, there are more than 80 live code branches in the application’s code base.
The application was developed by using Microsoft Visual Studio. Source code is stored in Team Foundation Server (TFS) in the main office. The branch offices access the source code by using TFS proxy servers.
Architectural Issues
Litware focuses on writing new code for customers. No resources are provided to refactor or remove existing code. Changes to the code base take a long time, as dependencies are not obvious to individual developers.
Merge operations of the code often take months and involve many developers. Code merging frequently introduces bugs that are difficult to locate and resolve.
Customers report that ownership costs of the retirement fund management system increase continually. The need to merge unrelated code makes even minor code changes expensive.
Customers report that bug reporting is overly complex.
Planned changes
Litware plans to develop a new suite of applications for investment planning. The investment planning applications will require only minor integration with the existing retirement fund management system.
The investment planning applications suite will include one multi-tier web application and two iOS mobile application. One mobile application will be used by employees; the other will be used by customers.
Litware plans to move to a more agile development methodology. Shared code will be extracted into a series of packages.
Litware has started an internal cloud transformation process and plans to use cloud-based services whenever suitable.
Litware wants to become proactive in detecting failures, rather than always waiting for customer bug reports.
Technical requirements
The company’s investment planning applications suite must meet the following requirements:
New incoming connections through the firewall must be minimized.
Members of a group named Developers must be able to install packages.
The principle of least privilege must be used for all permission assignments.
A branching strategy that supports developing new functionality in isolation must be used.
Members of a group named Team Leaders must be able to create new packages and edit the permissions of package feeds.
Visual Studio App Center must be used to centralize the reporting of mobile application crashes and device types in use.
By default, all releases must remain available for 30 days, except for production releases, which must be kept for 60 days.
Code quality and release quality are critical. During release, deployments must not proceed between stages if any active bugs are logged against the release.
The mobile applications must be able to call the share pricing service of the existing retirement fund management system. Until the system is upgraded, the service will only support basic authentication over HTTPS.
The required operating system configuration for the test servers changes weekly. Azure Automation State Configuration must be used to ensure that the operating system on each test server is configured the same way when the servers are created and checked periodically.
Current Technical Issue
The test servers are configured correctly when first deployed, but they experience configuration drift over time. Azure Automation State Configuration fails to correct the configurations.
Azure Automation State Configuration nodes are registered by using the following command.
3120
Drag and Drop Question
Which package feed access levels should be assigned to the Developers and Team Leaders groups for the investment planning applications suite? To answer, drag the appropriate access levels to the correct groups. Each access level may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
3121
Answer:
3122
Explanation:
Box 1: Reader
Members of a group named Developers must be able to install packages.
Feeds have four levels of access: Owners, Contributors, Collaborators, and Readers. Owners can add any type of identity-individuals, teams, and groups-to any access level.
Box 2: Owner
Members of a group named Team Leaders must be able to create new packages and edit the permissions of package feeds.


Resources From:

And,

New AZ-400 Exam Dumps (PDF and VCE) at:


Free Braindump2go AZ-400 Exam Questions from Google Drive:

 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
New Question
Note: This question is part of a ser les of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question m this section, you will NOT be able to return to it As a result, these questions will not appear m the review screen
You integrate a cloud-hosted Jenkins server and a new Azure Dev Ops deployment.
You need Azure Dev Ops lo send a notification to Jenkins when a developer commits changes to a branch in Azure Repos.
Solution: You create an email subscription to an Azure DevOps notification.
Does this meet the goal?

A. Yes
B. NO

Answer: B

New Question
Your company develops an app for OS. All users of the app have devices that are members of a private distribution group in Microsoft Visual Studio App Center.
You plan to distribute a new release of the app.
You need to identify which certificate file you require to distribute the new release from App Center.
Which file type should you upload to App Center?

A. .cer
B. .pvk
C. .pfx
D. .p12

Answer: D

New Question
Your company hosts a web application in Azure. The company uses Azure Pipelines for the build and release management of the application.
Stakeholders report that the past few releases have negatively affected system performance.
You configure alerts in Azure Monitor.
You need to ensure that new releases are only deployed to production if the releases meet defined performance baseline criteria in the staging environment first
What should you use to prevent the deployment of releases that fail to meet the performance baseline?

A. a trigger
B. an Azure function
C. a gate
D. an Azure Scheduler job

Answer: C

New Question
Your company is building a mobile app that targets Android devices and OS devices. Your team uses Azure DevOps to manage all work items and release cycles. You need to recommend a solution to perform the following tasks
  • Collect crash reports for issue analysis
  • Distribute beta releases to your testers.
  • Get user feedback on the functionality of new apps.
What should you include in the recommendation?

A. Jenkins integration
B. Azure Application Insights widgets
C. the Microsoft Test & Feedback extension
D. Microsoft Visual Studio App Center integration

Answer: C

New Question
Your company is building a new solution in Java.
The company currently uses a SonarQube server to analyze the code of .NET solutions.
You need to analyze and monitor the code quality of the Java solution.
Which task types should you add to the build pipeline?

A. Octopus
B. Chef
C. Maven
D. Grunt

Answer: C

New Question
Your company has a project in Azure DevOps.
You need to ensure that when there are multiple builds pending deployment only the most recent build is deployed.
What should you use?

A. deployment queue settings
B. deployment conditions
C. release gates
D. pull request triggers

Answer: A

New Question
Your company develops a client banking application that processes a large volume of data.
Code quality is an ongoing issue for the company. Recently, the code quality has deteriorated because of an increase in time pressure on the development team.
You need to implement static code analysis.
During which phase should you use static code analysis?

A. build
B. production release
C. staging
D. integration testing

Answer: D

New Question
You have a GitHub repository.
You create a new repository in Azure DevOps.
You need to recommend a procedure to clone the repository from GitHub to Azure DevOps.
What should you recommend?

A. Create a webhook.
B. Create a service connection for GitHub.
C. From Import a Git repository, click Import
D. Create a pull request.
E. Create a personal access token in Azure DevOps.

Answer: C

New Question
Your company is concerned that when developers introduce open source libraries, it creates licensing compliance issues.
You need to add an automated process to the build pipeline to detect when common open source libraries are added to the code base.
What should you use?

A. PDM
B. OWASPZAP
C. WhiteSource
D. Jenkins

Answer: C

New Question
Your company has a project in Azure DevOps for a new application. The application will be deployed to several Azure virtual machines that run Windows Server 2016.
You need to recommend a deployment strategy for the virtual machines. The strategy must meet the following requirements:
  • Ensure that the virtual machines maintain a consistent configuration.
  • Minimize administrative effort to configure the virtual machines
What should you include in the recommendation?

A. Deployment YAML and Azure pipeline stage templates
B. Azure Resource Manager templates and the Custom Script Extension for Windows
C. Azure Resource Manager templates and the PowerShell Desired State Configuration (DSC) extension
for Windows
D. Deployment YAML and Azure pipeline deployment groups\

Answer: C

New Question
Drag and Drop Question
You are implementing a package management solution for a Node.js application by using Azure Artifacts.
You need to configure the development environment to connect to the package repository. The solution must minimize the likelihood that credentials will be leaked. Which file should you use to configure each connection? To answer, drag the appropriate files to the correct connections. Each file may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content
NOTE: Each correct selection is worth one point.
3123
Answer:
3124
Resources From:

And,

New AZ-400 Exam Dumps (PDF and VCE) at:


Free Braindump2go AZ-400 Exam Questions from Google Drive:

 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
2020/Jan some new braindump2go AZ-400 Exam Questions,

Case Study - Litware
Overview
Existing Environment
Litware, Inc. e an independent software vendor (ISV). Litware has a main office and five branch offices.
Application Architecture
The company’s primary application is a single monolithic retirement fund management system based on ASP.NET web forms that use logic written in VB.NET. Some new sections of the application are written in C#.
Variations of the application are created for individual customers. Currently, there are more than 80 live code branches in the application’s code base.
The application was developed by using Microsoft Visual Studio. Source code is stored in Team Foundation Server (TFS) in the main office. The branch offices access the source code by using TFS proxy servers.
Architectural Issues
Litware focuses on writing new code for customers. No resources are provided to refactor or remove existing code. Changes to the code base take a long time, as dependencies are not obvious to individual developers.
Merge operations of the code often take months and involve many developers. Code merging frequently introduces bugs that are difficult to locate and resolve.
Customers report that ownership costs of the retirement fund management system increase continually. The need to merge unrelated code makes even minor code changes expensive.
Customers report that bug reporting is overly complex.
Planned changes
Litware plans to develop a new suite of applications for investment planning. The investment planning applications will require only minor integration with the existing retirement fund management system.
The investment planning applications suite will include one multi-tier web application and two iOS mobile application. One mobile application will be used by employees; the other will be used by customers.
Litware plans to move to a more agile development methodology. Shared code will be extracted into a series of packages.
Litware has started an internal cloud transformation process and plans to use cloud-based services whenever suitable.
Litware wants to become proactive in detecting failures, rather than always waiting for customer bug reports.
Technical requirements
The company’s investment planning applications suite must meet the following requirements:
New incoming connections through the firewall must be minimized.
Members of a group named Developers must be able to install packages.
The principle of least privilege must be used for all permission assignments.
A branching strategy that supports developing new functionality in isolation must be used.
Members of a group named Team Leaders must be able to create new packages and edit the permissions of package feeds.
Visual Studio App Center must be used to centralize the reporting of mobile application crashes and device types in use.
By default, all releases must remain available for 30 days, except for production releases, which must be kept for 60 days.
Code quality and release quality are critical. During release, deployments must not proceed between stages if any active bugs are logged against the release.
The mobile applications must be able to call the share pricing service of the existing retirement fund management system. Until the system is upgraded, the service will only support basic authentication over HTTPS.
The required operating system configuration for the test servers changes weekly. Azure Automation State Configuration must be used to ensure that the operating system on each test server is configured the same way when the servers are created and checked periodically.
Current Technical Issue
The test servers are configured correctly when first deployed, but they experience configuration drift over time. Azure Automation State Configuration fails to correct the configurations.
Azure Automation State Configuration nodes are registered by using the following command.
5788

New Question
To resolve the current technical issue, what should you do to the Register-AzureRmAutomationDscNode command?

A. Change the value of the ConfigurationMode parameter.
B. Replace the Register-AzureRmAutomationDscNode cmdlet with Register-AzureRmAutomationScheduledRunbook
C. Add the AllowModuleOverwrite parameter.
D. Add the DefaultProfile parameter.

Answer: A

New Question
What should you use to implement the code quality restriction on the release pipeline for the investment planning applications suite?

A. a trigger
B. a pre deployment approval
C. a post-deployment approval
D. a deployment gate

Answer: B

New Question
Hotspot Question
How should you complete the code to initialize App Center in the mobile application? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection a worth one point.
5789
Answer:
5790
New Question
Hotspot Question
How should you configure the release retention policy for the investment planning applications suite? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
5791
Answer:
5792
New Question
Hotspot Question
You need to configure a cloud service to store the secrets required by the mobile applications to call the share.
What should you include in the solution? To answer, select the appropriate options m the answer area. NOTE: Each correct selection is worth one point.
5793
Answer:
5794

Resources from:

And,

Download 2020 New AZ-400 Exam Dumps (PDF and VCE) at:


Get 2020 Free Braindump2go AZ-400 Exam Questions from Google Drive:
 

Kellyeperry

Member
Member
Joined
Jun 12, 2016
Messages
1,753
Reaction score
30
Points
38
Case Study - Contoso, Ltd Background
Contoso, Ltd. is a manufacturing company that has a main office in Chicago.
Contoso plans to improve its IT development and operations processes by implementing Azure DevOps principles. Contoso has an Azure subscription and creates an Azure DevOps organization.
The Azure DevOps organization includes:
The Docker extension
A deployment pool named Pool7 that contains 10 Azure virtual machines that run Windows Server 2016
The Azure subscription contains an Azure Automation account.
Contoso plans to create projects in Azure DevOps as shown in the following table.
5795
Technical requirements
Contoso identifies the following technical requirements:
Implement build agents for Project1.
Whenever possible, use Azure resources.
Avoid using deprecated technologies.
Implement a code flow strategy for Project2 that will:
  • Enable Team2 to submit pull requests for Project2.
  • Enable Team2 to work independently on changes to a copy of Project2.
  • Ensure that any intermediary changes performed by Team2 on a copy of Project2 will be subject to the same restrictions as the ones defined in the build policy of Project2.
Whenever possible implement automation and minimize administrative effort.
Implement Project3, Project5, Project6, and Project7 based on the planned changes
Implement Project4 and configure the project to push Docker images to Azure Container Registry.
New Question
You add the virtual machines as managed nodes in Azure Automation State Configuration.
You need to configure the computer in Group7.
What should you do?

A. Run the Register-AzureRmAutomationDscNode Azure Powershell cmdlet.
B. Modify the ConfigurationMode property of the Local Configuration Manager (LCM).
C. Install PowerShell Core.
D. Modify the RefreshMode property of the Local Configuration Manager (LCM).

Answer: A

New Question
In Azure DevOps, you create Project3.
You need to meet the requirements of the project.
What should you do first?

A. From Azure DevOps, create a service endpoint.
B. From SonarQube, obtain an authentication token.
C. From Azure DevOps, modify the build definition.
D. From SonarQube, create a project.

Answer: A

New Question
Drag and Drop Question
You need to configure Azure Automation for the computers in Group7.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
5796
Answer:
5797
New Question
Hotspot Question
How should you configure the filters for the Project5 trigger? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
5798
Answer:
5799
New Question
Drag and Drop Question
You need to implement the code flow strategy for Project2 in Azure DevOps.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange in the correct order.
5800
Answer:
5801
New Question
Drag and Drop Question
You need to implement Project6.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them m the correct order.
5802
Answer:
5803
Resources from:

And,

Download 2020 New AZ-400 Exam Dumps (PDF and VCE) at:


Get 2020 Free Braindump2go AZ-400 Exam Questions from Google Drive:
 
Top