400-101 LAB Passing with Valid 400-101 LAB Dumps

Discussion in 'CCIE Routing and Switching' started by Frische, Mar 21, 2018.

  1. Frische

    Frische Member
    Member

    Joined:
    Mar 1, 2018
    Messages:
    14
    Likes Received:
    23
    Wrote the 400-101 LAB exam few days ago after passing the 400-101 exam! Luckily PASSING~~~LOL

    There are 3 parts of the 400-101 LAB exam:

    1. Troubleshooting, full score is 24, you should get 20 points at least, 2h with virtual devices
    2. Diagnostic, full score is 6, you should get 4 points at least, 30 minutes with NO device
    3. LAB Configuration, full score is 70, you should get 56 points at least, 5h and 30 minutes with virtual devices

    Detail of 3 parts:
    1. Troubleshooting: 2 Sets topology, TS1 and TS2
    2. Diagnostic: 8 Sets
    3. LAB Configuration: 3 Sets topology, H1/H1+ CFG and H2/H2+ CFG and H3 CFG

    Tips for 3 parts:
    1. Troubleshooting: TS1 and TS2 -- understand faults and init configuration
    2. Diagnostic: remember difference of evey Diagnostic
    3. LAB Configuration: Practice H1/H1+ CFG and H2/H2+ CFG with solution and without solution, again and again, Practice H3 CFG on remote server again and again!!!
    4. TS2: AC forward, R15 AND R14 NO NE-HO-S, Tun0 p-2-m mode, SAME Tunnel key, inside ADDRESS OF R25 AND R24 is wrong
    5. H2+ CFG: Many VLAN ports are wrong, you need to correct them. The OSPF of SW4 and SW3 are blank, you need to config them. Many OSPF and BGP do not have ROUTER-ID, note to check them carefully!!!
    ......MORE

    I watched the 400-101 LAB training videos and other available training courses and materials and practiced the PassLeader 400-101 LAB dumps, total 3 months before taking 400-101 LAB exam.

    p.s. Part of PassLeader 400-101 LAB dumps FYI:

    Dear visitor, you need to Register or Login to view links on Certify Chat.



    (BTW, the premium version of PassLeader 400-101 LAB dumps contain 6 LAB Configuration + 3 Troubleshooting + 4 Diagnostic~~~HIGHLY RECOMMEND!!!)

    More, if you do not have the certifychat account, just copy the following short link and get that PassLeader 400-101 LAB dumps:

    bit.ly/passleader-400-101-lab-dumps

    Good luck!!!

    p.s. The price of SPO CCIE training course is very expensive, around $1500-$1600 at least. I am pool and I can only pay less money for PassLeader 400-101 LAB dumps and found free study materials by using Google.

    Thank goodness, I luckily passed the 400-101 LAB exam!!!

    HIGHLY RECOMMEND PassLeader!!!
     
    #1 Frische, Mar 21, 2018
    Last edited: Mar 22, 2018
  2. SuzyMoore

    SuzyMoore Member
    Member

    Joined:
    Mar 21, 2018
    Messages:
    10
    Likes Received:
    0

    Dear visitor, you need to Register or Login to view links on Certify Chat.

    Wrote the 400-101 LAB exam few days ago after passing the 400-101 exam! Luckily PASSING~~~LOL

    There are 3 parts of the 400-101 LAB exam:

    1. Troubleshooting, full score is 24, you need get 20 points at least, 2h with virtual devices
    2. Diagnostic, full score is 6, you need get 4 points at least, 30 minutes with NO device
    3. LAB Configuration, full score is 70, you need get 56 points at least, 5h and 30 minutes with virtual devices

    Detail of 3 parts:
    1. Troubleshooting: 2 Sets topology, TS1 and TS2
    2. Diagnostic: 8 Sets
    3. LAB Configuration: 3 Sets topology, H1/H1+ CFG and H2/H2+ CFG and H3 CFG

    Tips for 3 parts:
    1. Troubleshooting: TS1 and TS2 -- understand faults and init configuration
    2. Diagnostic: remember difference of evey Diagnostic
    3. LAB Configuration: Practice H1/H1+ CFG and H2/H2+ CFG with solution and without solution, again and again, Practice H3 CFG on remote server again and again!!!

    I watched the 400-101 LAB training videos and other available training courses and materials and practiced the PassLeader 400-101 LAB dumps, total 3 months before taking 400-101 LAB exam.

    (BTW, the premium version of PassLeader 400-101 LAB dumps contain 6 LAB Configuration + 3 Troubleshooting + 4 Diagnostic~~~HIGHLY RECOMMEND!!!)

    More, if you do not have the certifychat account, just copy the following short link and get that PassLeader 400-101 LAB dumps:

    bit.ly/passleader-400-101-lab-dumps

    Good luck!!!
    Click to expand...
    Congratulations!!!

    Did you buy that PassLeader 400-101 LAB dumps???

    Please kindly share that premium PassLeader 400-101 LAB dumps with us.

    The biggest thanks!!!!!!
     
  • AbbasHussain

    AbbasHussain Member
    Member

    Joined:
    Mar 7, 2018
    Messages:
    9
    Likes Received:
    0

    Dear visitor, you need to Register or Login to view links on Certify Chat.



    Congratulations!!!

    How about the H3 CFG?

    Please share your CONFIG ENVIRONMENT.

    And, would you like to share that PassLeader 400-101 LAB dumps with me???

    Thanks in advance!!!
     
    #3 AbbasHussain, Mar 22, 2018
    Last edited: Mar 22, 2018
  • SoniSingh

    SoniSingh Member
    Member

    Joined:
    Mar 22, 2018
    Messages:
    4
    Likes Received:
    0
    Good feedback!

    I will try that PassLeader 400-101 LAB dumps.

    Thanks!!!
     
  • MihailPetreski

    Member

    Joined:
    Mar 23, 2018
    Messages:
    5
    Likes Received:
    2
    Congratulations!!!

    Please kindly upload your study materials including that PassLeader 400-101 LAB dumps.

    Thanks a lot!!!
     
  • JoeEllis

    JoeEllis Member
    Member

    Joined:
    Jan 25, 2018
    Messages:
    10
    Likes Received:
    0
    Well Done!!!

    Thanks for sharing reviews of the CCIE 400-101 LAB exam!!!
     
  • DexGrace

    DexGrace Member
    Member

    Joined:
    Jan 30, 2018
    Messages:
    14
    Likes Received:
    4
    Hi, Frische!

    Congrats for your passing!!!

    I hope you can share that PassLeader 400-101 LAB with me.

    vdouyengbers at outlook dot com

    Thanks a lot!!!
     
  • Dannykoh

    Dannykoh Member
    Member

    Joined:
    Feb 1, 2018
    Messages:
    16
    Likes Received:
    1
    Congrats!

    Please share PassLeader 400-101 LAB dumps.

    Thanks!!!
     
  • ITSSASA

    ITSSASA Member
    Member

    Joined:
    Mar 12, 2018
    Messages:
    6
    Likes Received:
    0
    I passed the 400-101 LAB exam yesterday!!!

    Thanks that PassLeader 400-101 LAB dumps, it helped me a lot!

    Thanks for sharing!!!

    And, I will write the exam details later.
     
  • HetalParikh02

    HetalParikh02 Member
    Member

    Joined:
    Jan 24, 2018
    Messages:
    7
    Likes Received:
    0
    Congratulations for your CCIE 400-101 LAB passing!!!

    Please kindly share that premium PassLeader 400-101 LAB dumps with me!

    hetalparikh02 at bluewin dot ch

    Really Appreciate!!!
     
  • RajivMohan

    RajivMohan Member
    Member

    Joined:
    Mar 20, 2018
    Messages:
    17
    Likes Received:
    3
    Congratulations!

    Would you like to share that PassLeader 400-101 LAB dumps???

    Thanks!!!
     
  • John M. Phelps

    Member

    Joined:
    Aug 5, 2016
    Messages:
    13
    Likes Received:
    8
    Passed 400-101 LAB exam few days ago!!!

    Mainly learned that premium PassLeader 400-101 LAB dumps.

    TS2:

    All tickets were similar to PassLeader 400-101 LAB dumps.

    Attention 2 tickets:

    Ticket 1:
    SW400-410:
    VLAN access-map ATTACK 20
    Action forword

    Ticket 7:
    similar to PassLeader, only 2 faults: R3 missed the "MPLS IP" command, R5 exported the wrong router-target.

    H2 DIAG:

    Same as PassLeader 400-101 LAB dumps.

    H3 CFG:

    99% similar to PassLeader 400-101 LAB dumps.

    That's all.

    Thanks PassLeader 400-101 LAB dumps!!!
     
  • Ute Peters

    Ute Peters Member
    Member

    Joined:
    Apr 18, 2018
    Messages:
    8
    Likes Received:
    0
    Congratulations, all those who passed the 400-101 LAB exam.

    And, anyone kindly share that premium PassLeader 400-101 LAB dumps collection???

    Thanks in advance!!!
     
  • JorgeBlanco

    JorgeBlanco Member
    Member

    Joined:
    Mar 5, 2018
    Messages:
    5
    Likes Received:
    0
    GREAT!!!

    Passed the CCIE 400-101 LAB exam finally on 8/May/2018!!!

    Mainly learned that PassLeader 400-101 LAB dumps, valid enough for passing.

    I suggest: really no need to buy other expensive 400-101 LAB study materials, that PassLeader 400-101 LAB materials are enough for passing.

    Good luck, all!!!
     
  • Tariq Gill

    Tariq Gill Member
    Member

    Joined:
    Jun 6, 2018
    Messages:
    6
    Likes Received:
    0
    Thanks all helpful reviews!

    Anybody kindly share the premium PassLeader 400-101 LAB dumps???

    Thanks in advance!!!
     
  • Gerald M. Silva

    Member

    Joined:
    Aug 10, 2016
    Messages:
    12
    Likes Received:
    2
    Congratulations!!!

    Passed 400-101 LAB last week (8/June/2018) from Hong Kong!!!

    TS2-3:
    Q2: R14-nat, acl does not contain Server1 address, delete deny 10.1 acl.
    Q7: LDP password CISCO -- Uppercase.
    Q10: The configuration of R25 is correct...

    Lab:
    1. sw5/6 e0/0 -- VLAN999 -- shutdown, default
    2. data center can not network,point to point,no need to set DR, BDR
    3. delete eigrp 1, R9, 10, 53, 54 eigrp -- shutdown
    4. default-information originate R11-14, add "always"
    5. sw10 tracert 10.2.101.254: max ibgp 2

    I mainly practised that premium PassLeader 400-101 LAB dumps, still valid enough for passing now.

    Good luck!!!
     
    #16 Gerald M. Silva, Jun 12, 2018
    Last edited: Jun 12, 2018
    Warren Peperak and Pedro Ramirez like this.
  • Achmad Zein

    Achmad Zein Member
    Member

    Joined:
    Aug 15, 2018
    Messages:
    1
    Likes Received:
    0
    Thanks for all above comments and reviews!!!

    I just cleared my CCIE 400-101 LAB test yesterday (14/Aug/2018) from Brussels.

    The exam is not easy, a little difficult in fact.

    I practiced that premium PassLeader 400-101 LAB study materials for several times, which helped much for my passing!!!

    And, I highly recommend those who are preparing for the CCIE LAB test to try that premium PassLeader 400-101 LAB study materials, not very expensive, but really helpful.

    Good luck, all!!!
     
  • CHAND SHEKAR

    CHAND SHEKAR Member
    Member

    Joined:
    Aug 22, 2018
    Messages:
    1
    Likes Received:
    2
    Congratulations!!!

    Just passed the CCIE R&S 400-101 LAB yesterday (21/Aug/2018, Beijing)~~~LOL~~~

    I got the TS2 and D3 and H2+.

    In the TS2 section, there is no R51 in the OSPF of R60, DO NOT CARE THE R51. And, pay attention to route-map of R11 and R20 (DC2 10.4).

    And, that premium PassLeader 400-101 LAB dumps (or study materials) are still valid enough for passing, it helped a lot for my passing!!!

    Good luck, all! Wish you pass the CCIE R&S LAB!!!
     
    Warren Peperak and Pedro Ramirez like this.
  • Pedro Ramirez

    Pedro Ramirez Member
    Member

    Joined:
    Sep 28, 2018
    Messages:
    1
    Likes Received:
    1
    Congratulations!!!

    Just passed the CCIE R&S 400-101 LAB from San Jose (CA). LOL~~~

    The 400-101 LAB exam is a little difficult, ehh, compared with the 400-101 written exam.

    I got TS1, D3 and H3. All these are from the premium PassLeader 400-101 LAB dumps (or, study materials)

    In TS1:
    1. The MAC address of SW2 and R101 aligning R8
    2. NO PPP ipcp on R17
    3. The subnet mask of R22, 252 --> 248
    4. R22 nexthopself R6 delete summaryonly R1 R2 e0/0mpls ip
    5. R25, ipv6 network, error
    6. R15 ip nh redriect R19 U Uppercase --> Lowercase
    7. R107, no domamin timeout 1
    8. R7 R8 bgp no neighbor
    9. R8 0.125 outside 0.123 inside R7R8 NAT INSIDE
    10. R24 E0/0 secondary delete
    ...etc.

    In D3:
    Q1. dhcp snooping
    1. bootp --> 133
    2. sw1 no dhcp relay inf
    3. between sw1 and sw3

    Q2. Hacker Attack
    1. tcp, sniffer packet --> Attacker and Victim
    2. sudo shutdown
    3. tclsh Victim

    H3:
    Same as the premium PassLeader 400-101 LAB dumps (or, study materials).

    Thanks those who share their exam passing tips and thanks valid PassLeader 400-101 LAB dumps (study materials).

    I highly recommend the PassLeader 400-101 LAB dumps (study materials) to you all, and GOOD LUCK, ALL!!!
     
    Warren Peperak likes this.
  • Warren Peperak

    Member

    Joined:
    Oct 11, 2018
    Messages:
    1
    Likes Received:
    0
    Congratulations!!!

    Finally passed the 400-101 LAB test on 9/Oct/2018 (Tokyo, JP)!!!

    I got TS2++ and D2+ and H2++. All these items are from the premium PassLeader 400-101 LAB dumps (or, study materials)

    For TS2++:
    1. The MAC address of the port is NOT same as the last port.
    2. R14 list, not come across the Server 1.
    3. R10 -- 10.2.200/201.0 -- route-map...etc.
    4. NO of the new SP1.
    5. The encryption algorithm is NOT match, modify R60.
    6. vlan2001 not calls the pool of addresses.
    7. Not building the neighborship, and the password of R3 is wrong.
    8. Modifying the gateway of R30.
    9. ip nhrp map mul dy
    10. The issue of 123.45.67.100.

    For D2+:
    1. Shutdown the CE1's e0/0.
    2. Higher preference gateway information sent out.
    ......

    For H2++:
    Same as the premium PassLeader 400-101 LAB dumps (or, study materials).

    Thanks for your helpful comments and reviews.

    And, thanks the valid premium PassLeader 400-101 LAB dumps (or, study materials).

    What's more, PassLeader offers the Simulation Environment same as the actual test, really helpful! Highly Recommend the premium PassLeader 400-101 LAB dumps (or, study materials) to you all!!

    Good luck!!!
     
  • Share This Page